SQWareProduction:sybase:bin:sqwsyb DumpAllDatabases.ksh

Presentation

Script $gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh :

Run of sqwsyb_DumpDatabase.ksh in parallel mode
You can choose:

The parallel degree
Aggressiveness of run (number of seconds between two runs)
Aggressiveness of check end (number of seconds between two checks of end)

Filters to generate database list (you can mix all off them):

Include list of database
Exclude list of database
Include like clause
Exclude like clause
Where clause

Online help

The online help is available for most scripts with the -h option.
Ex: $gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -h
Content of this assistance :

Sourcing sqwsyb_Global.lib v2024.07 SQWareProduction for Sybase (dbSQWare) ... 

Usage: sqwsyb_DumpAllDatabases.ksh [-h] -I <dataserver> [+ options]

DESCRIPTION
   sqwsyb_DumpAllDatabases.ksh Dump all databases in parallel
SUPPORT
   Sybase supported versions: 12.5 <= v <= 16.0

PARAMETERS
     -I  dataserver     : Target dataserver.
OPTIONS
     -P    Nb threads   : Number of threads in parallel (by default 2).
     -ID   listdb       : List of databases holding tables to analyze (by default all).
     -ED   listdb       : List of databases to exclude.
     -IL   likeclause   : Like clause to generate databases list (example: 'db%').
     -EL   likeclause   : Like clause to exclude databases (example: 'nodb%').
     -WCD  whereclause  : Where clause to generate databases list.
     -FRT       code    : Force return code value on error.
     -RD directory      : Directory to write dump file (by default /$(echo ${HOME}|cut -d/ -f2)/syb_dump/$DSQUERY).
     -HI Nb             : Nb of generations to keep (by default 2).
     -CL Level          : Compression level (by default 1).
     -CR Rate           : Estimated rate of compression (by default 22).
     -AGR Nb_sec        : Nb of seconds between two runs (by default 10s).
     -AGE Nb_sec        : Nb of seconds between two checks of end (by default 30s).
     -SMS  SizeMax      : Size Max Stripe (by default 4096 Mo).
     -Type type         : Dump type full,inc,stb,fstb (by default full).
     -NoMail            : Deactivate sendmail on error pmexpdba@gmail.com (by default, send on error).
     -OldSyntax         : Force dump old syntax (by default, 'NewSyntax').
     -NewSyntax         : Force dump new syntax (by default, 'NewSyntax').
     -NoSyslogins       : Do not backup syslogins tables.
     -AddMail   email   : Email address to add at 'pmexpdba@gmail.com'.
     -SendReport        : Send execution log report.
     -AddFlagName mflag : Put '.mflag' at end of dump name.
     -CrossPlatform     : Put db in 'single user' mode and execute sp_flushstats before Dump.
     -TryCum            : Try 'dump cumulative' if 'dump tran' error (need to customize lfsqw_TryCum function).
     -h                 : Display the full usage.
     -s                 : Display samples of usage.
     -Locale    locale  : Force Locale for help display (fr,en).
     -Exec              : Execute commands (by default, display generated commands).

Note:
To be sure the aid is accurate, refer directly to the online help script -h option.

Error management

Errors passing arguments

This type of message is generated:

Lack 'dataserver' parameter, Usage: sqwsyb_DumpAllDatabases.ksh [-h] -I <dataserver> [+ options]
For full help : sqwsyb_DumpAllDatabases.ksh -h

If you are connecting through a terminal, no mail will be sent and you will have more this kind of message:

Begining     : 2020-11-29 20:10:30
End          : 2020-11-29 20:10:30
Duration     : 00:00:00

If you are not connected to a terminal, the error message appears and is sent by mail to the address contained in the variable $gvsqw_GlobalMail (See help customize this variable). The subject line will always start by "$gvsqw_MailMsg_sybase : " (See help customize this variable).

Note:
Sending mail can be disabled by the option -NoMail for one execution.

Execution errors

Whether you are or not connected to a terminal, the error message appears and an email containing a summary of treatment errors is sent to the address contained in the variable $gvsqw_Mail_sybase (See help customize this variable). The subject line will always start by "$gvsqw_MailMsg_sybase : " (See help customize this variable).

Note:
Sending mail can be disabled by the option -NoMail for one execution.

Usage examples

Sourcing sqwsyb_Global.lib v2024.07 SQWareProduction for Sybase (dbSQWare) ... 

#Standard help for script sqwsyb_DumpAllDatabases.ksh:


$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -h
#Display online help for this script

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -Locale en -h
#Display online help for this script with forcing of the 'en' locale (by default locale managed by $gvsqw_Locale)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -s
#Display usage examples for this script

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY
#Generate commands but don't execute them !

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -Exec
#Execute sqwsyb_DumpDatabase.ksh script to dump all database

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -HI <NumberOfGenerations> -Exec
#Change number of generations of backup to keep online

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -RD <DirName> -CR <NumericValue> -Exec
#Specify the path to write dumps with an estimated compression ratio (by default, $gvsqw_DefCompRate=22)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -CL <NumericValue> -Exec
#Applies a compression rate to dumps (by default, $gvsqw_DefCompLevel=1)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -SMS <NumericValue> -Exec
#Specify the max stripe size in Mo (by default, $gvsqw_DefMaxSizeStrip=4096)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -OldSyntax -Exec
#Force to write dumps using the old syntax (by default, $gvsqw_DumpSyntaxType=NewSyntax)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -NewSyntax -Exec
#Force to write dumps using the new syntax (by default, $gvsqw_DumpSyntaxType=NewSyntax)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -CrossPlatform -Exec
#Puts the database in 'single user' mode and execute sp_flushstats before dumping

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -AddFlagName -Exec
#Puts '.mflag' at the end of dumps's name

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -Type <TypedeDump> -Exec
#Execute generated commands and change dump type (full,inc,stb,fstb)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -AGR 20 -Exec
#Set the waiting time in seconds between two command run, 20s here

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -AGE 30 -Exec
#Set the waiting time in seconds between two end checks, 30s here

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -ID 'DbName1,DbName2' -Exec
#Execute generated commands for only the 2 specified databases

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -ED 'DbName3,DbName4' -Exec
#Execute generated commands except for the 2 specified databases

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -IL '%_PROD' -Exec
#Clause like to generate dynamic database list to include (example: 'dbprod%')

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -EL '%_TESTS' -Exec
#Clause like to generate dynamic database list to exclude (example: 'dbtest%')

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -WCD '<condition>' -Exec
#Clause where to generate dynamic database list to include (example: 'OPEN_MODE=MOUNTED')

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -P <NumericValue> -Exec
#Run sqwsyb_DumpDatabase.ksh script with a parallel degree of '<NumericValue>'
#Use by default the variable gvsqw_NbThreadXXX in $gvsqw_SybBin/../etc/sqwpg_GlobalVar.cfg
#You can change this default on all your environnement if you set this variable
#in configuration file $gvsqw_SybBin/../etc_cust/sqwpg_GlobalVar.cfg

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -AddMail 'mymail1@mydomaine.com,mymail2@mydomaine.com' -Exec
#Add the mail list to the default address managed by the variable gvsqw_GlobalMail

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -SendReport -Exec
#Send the log by email at the end of the treatment even if there is no error

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -NoMail -Exec
#Disables sending an email on error to $gvsqw_GlobalMail (by default, send on error)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -FRT <NumericValue> -Exec
#Force return code to '<NumericValue>' on error (if no error, "exit 0!")
#You can also force return code of this script on all your
#environnement if you set the variable: $gvsqw_ForcedReturnCodeScript_sqwsyb_DumpAllDatabases=<NumericValue>
#in configuration file $gvsqw_SybBin/../etc_cust/sqwsyb_GlobalVar.cfg

Note:
To be sure the examples are accurate, refer directly to the online help script -s option.

SQWareProduction:sybase:bin:sqwsyb DumpAllDatabases.ksh

Contents

Presentation

Online help

Error management

Errors passing arguments

Execution errors

Usage examples

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

dbSQWare

SQWareProduction

SQWareWeb

SQWareCentral

SQWareRepository

Tools