Template:SQWareProduction sqwsyb DumpAllDatabases.ksh example

Sourcing sqwsyb_Global.lib v2024.06 SQWareProduction for Sybase (dbSQWare) ... 

#Standard help for script sqwsyb_DumpAllDatabases.ksh:


$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -h
#Display online help for this script

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -Locale en -h
#Display online help for this script with forcing of the 'en' locale (by default locale managed by $gvsqw_Locale)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -s
#Display usage examples for this script

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY
#Generate commands but don't execute them !

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -Exec
#Execute sqwsyb_DumpDatabase.ksh script to dump all database

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -HI <NumberOfGenerations> -Exec
#Change number of generations of backup to keep online

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -RD <DirName> -CR <NumericValue> -Exec
#Specify the path to write dumps with an estimated compression ratio (by default, $gvsqw_DefCompRate=22)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -CL <NumericValue> -Exec
#Applies a compression rate to dumps (by default, $gvsqw_DefCompLevel=1)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -SMS <NumericValue> -Exec
#Specify the max stripe size in Mo (by default, $gvsqw_DefMaxSizeStrip=4096)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -OldSyntax -Exec
#Force to write dumps using the old syntax (by default, $gvsqw_DumpSyntaxType=NewSyntax)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -NewSyntax -Exec
#Force to write dumps using the new syntax (by default, $gvsqw_DumpSyntaxType=NewSyntax)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -CrossPlatform -Exec
#Puts the database in 'single user' mode and execute sp_flushstats before dumping

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -AddFlagName -Exec
#Puts '.mflag' at the end of dumps's name

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -Type <TypedeDump> -Exec
#Execute generated commands and change dump type (full,inc,stb,fstb)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -AGR 20 -Exec
#Set the waiting time in seconds between two command run, 20s here

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -AGE 30 -Exec
#Set the waiting time in seconds between two end checks, 30s here

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -ID 'DbName1,DbName2' -Exec
#Execute generated commands for only the 2 specified databases

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -ED 'DbName3,DbName4' -Exec
#Execute generated commands except for the 2 specified databases

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -IL '%_PROD' -Exec
#Clause like to generate dynamic database list to include (example: 'dbprod%')

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -EL '%_TESTS' -Exec
#Clause like to generate dynamic database list to exclude (example: 'dbtest%')

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -WCD '<condition>' -Exec
#Clause where to generate dynamic database list to include (example: 'OPEN_MODE=MOUNTED')

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -P <NumericValue> -Exec
#Run sqwsyb_DumpDatabase.ksh script with a parallel degree of '<NumericValue>'
#Use by default the variable gvsqw_NbThreadXXX in $gvsqw_SybBin/../etc/sqwpg_GlobalVar.cfg
#You can change this default on all your environnement if you set this variable
#in configuration file $gvsqw_SybBin/../etc_cust/sqwpg_GlobalVar.cfg

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -AddMail 'mymail1@mydomaine.com,mymail2@mydomaine.com' -Exec
#Add the mail list to the default address managed by the variable gvsqw_GlobalMail

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -SendReport -Exec
#Send the log by email at the end of the treatment even if there is no error

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -NoMail -Exec
#Disables sending an email on error to $gvsqw_GlobalMail (by default, send on error)

$gvsqw_SybBin/sqwsyb_DumpAllDatabases.ksh -I $DSQUERY -FRT <NumericValue> -Exec
#Force return code to '<NumericValue>' on error (if no error, "exit 0!")
#You can also force return code of this script on all your
#environnement if you set the variable: $gvsqw_ForcedReturnCodeScript_sqwsyb_DumpAllDatabases=<NumericValue>
#in configuration file $gvsqw_SybBin/../etc_cust/sqwsyb_GlobalVar.cfg